aluminum electrolytic capacitors/ nhg ? ee97 ? design, and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and / or use. should a safety concern ar ise regarding this product,please be sure to contact us immediately . mar.2006 nhg a series: type : endurance: +105 c 1000 to 2000 h smaller than series nhe rohs directive compliant -55 to +105 c -25 to +105 c 6.3 to 100 v.dc 160 to 450 v .dc 0.1 to 22000 f 1.0 to 330 f 20 % (120hz/+20 c) i 0.01 cv or 3( a) after 2 minutes appli- cation of rated working voltage at +20 c n dimensions in mm (not to scale) body dia. d lead dia. d lead space p 5 6.3 8 10 12.5 16 18 0.5 0.5 0.6 0.6 0.6 0.8 0.8 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ? w.v. (v.dc) 60 120 1k 10k 100k frequency(hz) 6.3 to 100 cap. (f) 0.1 to 33 47 to 470 1000 to 22000 1 to 330 0.80 1 1.35 1.50 1.50 0.75 1 1.55 1.80 2.00 160 to 450 0.80 1 1.35 1.50 1.50 0.85 1 1.10 1.15 1.15 i 0.06 cv + 10( a) after 2 minutes appli- cation of rated working voltage at +20 c n frequency correction factor for ripple current l l 16:l+1.0 max d 0.05 14 min 3 min d+0.5 max 10 p 0.5 d+0.5 max 8 p 0.5 l 20:l+2.0 max ( 6.3mmdia) radial lead type n features n specifications category temp. range rated w.v. range nominal cap. range capacitance tolerance dc leakage current tan endurance shelf life please see the attached standard products list capacitance change tan dc leakage current after following life test with dc voltage and +1052 c ripple current v alue applied (the sum of dc and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified below. after storage for 1000 hours at +1052 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits specified in endurance. (with voltage treatment) duration : 6.3 to 100v.w. ; ( 5 to 8) =1000 hours , ( 10 to 18)= 2000 hours 160 to 450v.w. ; 2000 hours post test requirements at +20 c 20% of initial measured value 200 % of initial specified value initial specified value sleeve vent japan malaysia china > = < = < = < = < = < = < = > = country of origin < = (mm)
aluminum electrolytic capacitors/ nhg ? ee98 ? design, and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and / or use. should a safety concern arise regarding this product,please be sure to contact us immediately. mar .2006 (hours) 6.3 16 25 (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (mm) (m a ) (v) tan (120hz) (+20 c) n lead space specification dia. length taping case size cap. (20%) lead dia. lead length w.v. straight ripple current (120hz) (+105 c) taping ? b min. packaging q'ty straight leads standard products taping ? i part no. when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5mm, 7.5mm, i=2.5mm. the taping dimensions are explained on p.196 of our catalog. please use it as a reference guide. 220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 eca0jhg221( ) 200 2000 470 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 eca0jhg471( ) 200 2000 1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 eca0jhg102( ) 200 1000 2200 10 16 710 0.30 2000 0.6 5.0 5.0 eca0jhg222( ) 200 500 3300 10 20 840 0.32 2000 0.6 5.0 5.0 eca0jhg332( ) 200 500 4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 eca0jhg472( ) 200 500 6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 eca0jhg682( ) 200 500 10000 16 25 1650 0.46 2000 0.8 7.5 7.5 eca0jhg103( ) 100 250 15000 16 31.5 2010 0.56 2000 0.8 7.5 eca0jhg153 100 22000 18 35.5 2350 0.70 2000 0.8 7.5 eca0jhg223 50 330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 eca1ahg331( ) 200 2000 470 8 11.5 250 0.24 1000 0.6 3.5 5.0 eca1ahg471( ) 200 1000 1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 eca1ahg102( ) 200 500 2200 10 20 760 0.26 2000 0.6 5.0 5.0 eca1ahg222( ) 200 500 10 3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 eca1ahg332( ) 200 500 4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 eca1ahg472( ) 200 500 6800 16 25 1570 0.34 2000 0.8 7.5 7.5 eca1ahg682( ) 100 250 10000 16 31.5 1890 0.42 2000 0.8 7.5 eca1ahg103 100 15000 18 35.5 2180 0.52 2000 0.8 7.5 eca1ahg153 50 100 5 11 110 0.20 1000 0.5 2.0 5.0 2.5 eca1chg101( ) 200 2000 220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 eca1chg221( ) 200 2000 330 8 11.5 260 0.20 1000 0.6 3.5 5.0 eca1chg331( ) 200 1000 470 8 11.5 310 0.20 1000 0.6 3.5 5.0 eca1chg471( ) 200 1000 1000 10 16 560 0.20 2000 0.6 5.0 5.0 eca1chg102( ) 200 500 2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 eca1chg222( ) 200 500 3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 eca1chg332( ) 200 500 4700 16 25 1480 0.26 2000 0.8 7.5 7.5 eca1chg472( ) 100 250 6800 16 31.5 1780 0.30 2000 0.8 7.5 eca1chg682 100 10000 18 35.5 2060 0.38 2000 0.8 7.5 eca1chg103 50 47 5 11 91 0.16 1000 0.5 2.0 5.0 2.5 eca1ehg470( ) 200 2000 100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 eca1ehg101( ) 200 2000 220 8 11.5 230 0.16 1000 0.6 3.5 5.0 eca1ehg221( ) 200 1000 330 8 11.5 310 0.16 1000 0.6 3.5 5.0 eca1ehg331( ) 200 1000 470 10 12.5 380 0.16 2000 0.6 5.0 5.0 eca1ehg471( ) 200 500 1000 10 20 680 0.16 2000 0.6 5.0 5.0 eca1ehg102( ) 200 500 2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 eca1ehg222( ) 200 500 3300 16 25 1400 0.20 2000 0.8 7.5 7.5 eca1ehg332( ) 100 250 4700 16 31.5 1750 0.22 2000 0.8 7.5 eca1ehg472 100 6800 18 35.5 2040 0.26 2000 0.8 7.5 eca1ehg682 50 47 5 11 90 0.14 1000 0.5 2.0 5.0 2.5 eca1vhg470( ) 200 2000 35 100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 eca1vhg101( ) 200 2000 220 8 11.5 270 0.14 1000 0.6 3.5 5.0 eca1vhg221( ) 200 1000 endu- rance
aluminum electrolytic capacitors/ nhg ? ee99 ? design, and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and / or use. should a safety concern ar ise regarding this product,please be sure to contact us immediately . mar.2006 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5mm, 7.5mm, i=2.5mm. the taping dimensions are explained on p.196 of our catalog. please use it as a reference guide. n standard products 63 35 (hours) (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (mm) (m a ) (v) lead space specification dia. length taping case size cap. (20%) lead dia. lead length w.v. straight ripple current (120hz) (+105 c) taping ? b min. packaging q'ty straight leads taping ? i part no. 330 10 12.5 350 0.14 2000 0.6 5.0 5.0 eca1vhg331( ) 200 500 470 10 16 460 0.14 2000 0.6 5.0 5.0 eca1vhg471( ) 200 500 1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 eca1vhg102( ) 200 500 2200 16 25 1260 0.16 2000 0.8 7.5 7.5 eca1vhg222( ) 100 250 3300 16 31.5 1610 0.18 2000 0.8 7.5 eca1vhg332 100 4700 18 35.5 1910 0.20 2000 0.8 7.5 eca1vhg472 50 0.1 5 11 1.1 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg0r1( ) 200 2000 0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr22( ) 200 2000 0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr33( ) 200 2000 0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr47( ) 200 2000 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg010( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg2r2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg3r3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg4r7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg100( ) 200 2000 50 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 eca1hhg470( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 eca1hhg101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 eca1hhg221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 eca1hhg331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 eca1hhg471( ) 200 500 1000 12.5 25 950 0.12 2000 0.6 5.0 5.0 eca1hhg102( ) 200 500 2200 16 31.5 1470 0.14 2000 0.8 7.5 eca1hhg222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 eca1hhg332 50 10 5 11 46 0.10 1000 0.5 2.0 5.0 2.5 eca1jhg100( ) 200 2000 22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 eca1jhg220( ) 200 2000 33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 eca1jhg330( ) 200 2000 47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 eca1jhg470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 eca1jhg101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 eca1jhg221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 eca1jhg331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 eca1jhg471( ) 200 500 1000 16 25 930 0.10 2000 0.8 7.5 7.5 eca1jhg102( ) 100 250 2200 18 35.5 1610 0.12 2000 0.8 7.5 eca1jhg222 50 0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 eca2ahgr47( ) 200 2000 1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg010( ) 200 2000 2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg2r2( ) 200 2000 100 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg3r3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg4r7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 eca2ahg100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 eca2ahg220( ) 200 2000 tan (120hz) (+20 c) endu- rance
aluminum electrolytic capacitors/ nhg ? ee100 ? design, and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and / or use. should a safety concern arise regarding this product,please be sure to contact us immediately. mar .2006 200 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5mm, 7.5mm, i=2.5mm. the taping dimensions are explained on p.196 of our catalog. please use it as a reference guide. (hours) (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (mm) (m a ) (v) n lead space specification dia. length taping case size cap. (20%) lead dia. lead length w.v. straight ripple current (120hz) (+105 c) taping ? b min. packaging q'ty straight leads standard products taping ? i part no. 33 8 11.5 130 0.08 1000 0.6 3.5 5.0 eca2ahg330( ) 200 1000 47 10 12.5 165 0.08 2000 0.6 5.0 5.0 eca2ahg470( ) 200 500 100 10 20 265 0.08 2000 0.6 5.0 5.0 eca2ahg101( ) 200 500 100 220 12.5 25 440 0.08 2000 0.6 5.0 5.0 eca2ahg221( ) 200 500 330 16 25 540 0.08 2000 0.8 7.5 7.5 eca2ahg331( ) 100 250 470 16 25 715 0.08 2000 0.8 7.5 7.5 eca2ahg471( ) 100 250 1000 18 35.5 985 0.08 2000 0.8 7.5 eca2ahg102 50 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2chg010( ) 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 eca2chg2r2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 eca2chg3r3( ) 200 2000 4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 eca2chg4r7( ) 200 2000 10 10 12.5 70 0.15 2000 0.6 5.0 5.0 eca2chg100( ) 200 500 160 22 10 20 130 0.15 2000 0.6 5.0 5.0 eca2chg220( ) 200 500 33 10 20 180 0.15 2000 0.6 5.0 5.0 eca2chg330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 eca2chg470( ) 200 500 100 16 25 335 0.15 2000 0.8 7.5 7.5 eca2chg101( ) 100 250 220 16 31.5 540 0.15 2000 0.8 7.5 eca2chg221 100 330 18 31.5 705 0.15 2000 0.8 7.5 eca2chg331 50 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg010( ) 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg2 r2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg3 r3( ) 200 2000 4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 eca2dhg4 r7( ) 200 1000 10 10 16 80 0.15 2000 0.6 5.0 5.0 eca2dhg100( ) 200 500 22 10 20 140 0.15 2000 0.6 5.0 5.0 eca2dhg220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 eca2dhg330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 eca2dhg470( ) 200 500 100 16 25 335 0.15 2000 0.8 7.5 7.5 eca2dhg101( ) 100 250 220 18 31.5 575 0.15 2000 0.8 7.5 eca2dhg221 50 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2ehg010( ) 200 2000 2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 eca2ehg2 r2( ) 200 2000 3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 eca2ehg3r3( ) 200 1000 4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 eca2ehg4r7( ) 200 1000 250 10 10 16 88 0.15 2000 0.6 5.0 5.0 eca2ehg100( ) 200 500 22 12.5 20 155 0.15 2000 0.6 5.0 5.0 eca2ehg220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 eca2ehg330( ) 200 500 47 12.5 25 230 0.15 2000 0.6 5.0 5.0 eca2ehg470( ) 200 500 100 16 31.5 365 0.15 2000 0.8 7.5 eca2ehg101 100 1 6.3 11.2 18 0.20 2000 0.5 2.5 5.0 2.5 eca2vhg010( ) 200 2000 2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 eca2vhg2r2( ) 200 1000 350 3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 eca2vhg3r3( ) 200 500 4.7 10 16 50 0.20 2000 0.6 5.0 5.0 eca2vhg4r7( ) 200 500 10 10 20 82 0.20 2000 0.6 5.0 5.0 eca2vhg100( ) 200 500 tan (120hz) (+20 c) endu- rance
aluminum electrolytic capacitors/ nhg ? ee101 ? design, and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and / or use. should a safety concern ar ise regarding this product,please be sure to contact us immediately . mar.2006 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5mm, 7.5mm, i=2.5mm. the taping dimensions are explained on p.196 of our catalog. please use it as a reference guide. n standard products 350 (hours) (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (mm) (m a ) (v) lead space specification dia. length taping case size cap. (20%) lead dia. lead length w.v. straight ripple current (120hz) (+105 c) taping ? b min. packaging q'ty straight leads taping ? i part no. 22 12.5 20 130 0.20 2000 0.6 5.0 5.0 eca2vhg220( ) 200 500 33 16 25 195 0.20 2000 0.8 7.5 7.5 eca2vhg330( ) 100 250 47 16 25 230 0.20 2000 0.8 7.5 7.5 eca2vhg470( ) 100 250 100 18 31.5 375 0.20 2000 0.8 7.5 eca2vhg101 50 1 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 2.5 eca2ghg010( ) 200 2000 2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 eca2ghg2r2( ) 200 1000 3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 eca2ghg3r3( ) 200 500 400 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 eca2ghg4r7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 eca2ghg100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 eca2ghg220( ) 200 500 33 16 25 195 0.24 2000 0.8 7.5 7.5 eca2ghg330( ) 100 250 47 16 31.5 250 0.24 2000 0.8 7.5 eca2ghg470 100 1 8 11.5 18 0.24 2000 0.6 3.5 5.0 eca2whg010( ) 200 1000 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 eca2whg2r2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 eca2whg3r3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 eca2whg4r7( ) 200 500 10 12.5 20 75 0.24 2000 0.6 5.0 5.0 eca2whg100( ) 200 500 22 16 25 115 0.24 2000 0.8 7.5 7.5 eca2whg220( ) 100 250 33 16 31.5 155 0.24 2000 0.8 7.5 eca2whg330 100 tan (120hz) (+20 c) endu- rance 450
|
